QC Results
QC Results are the values or options of the Quality Control Test Results that can be setup once to allow for the duplication on several QC Tests and multiple QC Groups. Within QC Results, you can enter the target result option/value and the tolerances within based on the QC Test and specified QC Results code.
Note
QC Results must be set up first to then attach to a QC Test. Once the QC Results have been attached to the QC Test, it can then be used in within QC Groups and subsequently in a QC Document. The sections within this page are setup to reflect this order of operation.
Navigate to QC Results by clicking on the magnifying glass and in the search box type QC Results.
Click New or Edit to open a QC Result Card.
General FastTab
This section has the following fields for QC Results.
| FIELD NAME | FUNCTION |
|---|---|
| Code | User defined Code for the QC Result. |
| Description | User defined Description of the QC Test. |
| Type | • Option: Requires an option. User defined. |
| • Text: Free form text by user. | |
| • Integer: A number value. | |
| • Decimal: A decimal range. | |
| NOTE: Type is the correlation from Result Option/ Range Name. For example, if the Type = Decimal, the subsequent Result Option/Range Name will be an Option or Range relating to a decimal value. | |
| Minimum Value | The least value allowable. |
| Maximum Value | The highest value allowable. |
QC Test Result Card Sub Form FastTab
The following fields are found on the QC Test Results Card and the QC Test Results FastTab on the QC Tests Card.
| FIELD NAME | FUNCTION |
|---|---|
| Result Option/Range Name | The Option and Range as related in the Type field on the General FastTab and the QC Result Code in the Result List Validation tab. |
| Result Value/Filter | The Value and Filter based on the Type field in the General FastTab and the Result Value Inheritance field on the Result List Validation tab. |
| Result Status | Status of the QC Test. Options are: |
| • In Process | |
| • Completed | |
| • Pass | |
| • Fail | |
| Result Classification Code | Code to be printed on the CoA. |
| Result Minimum Value | The lowest value the QC Test will allow for a status of Pass/Fail. This column is hidden by default. |
| Result Maximum Value | The highest value the QC Test will allow for a status of Pass/Fail. This column is hidden by default. |
How To: Set Up a QC Result
To set up QC Results click magnifying glass and type QC Results and select the related option.
From the QC Results List page, click New and a new QC Results card will open.
Within the QC Result card, fill in the General FastTab fields as described in the above section.
On the QC Test Result Card subform, fill in the following fields as described above.
Click the Back arrow to close out of card.
